Bypass Infomir MAG Block

Since January 2019 Infomir started to fight against IPTV Providers and put a blockage up with a software update. To bypass the blockage you need to downgrade the firmware.

“Access to the web page you were trying to visit has been blocked in accordance with manufacturer content protection and piracy prevention policy. Please contact your IPTV service provider for more information.”

Requirements to bypass the blockage.

  • Laptop / Computer with Internet connection
  • USB Stick (Format: FAT32)

 

Tutorial: How to Bypass the Infomir blockage

  • Step 1: Disable the Option “Automatic Updates“. You can find it in “Software autoupdate“.

 

  • Step 2: After you have disabled “Automatic Updates“, you need to reset your device into factory settings.
    • To start the process you need to cut your device of the power supply.
    • After that you need to hold the Menu-Button for about 10 seconds while you connect it to the power supply again.
    • Now you should get a Blue Screen with many Options. To put your device into Factory Settings, please select the option “Def.Settings” and after that “Ok”.

**NOTE: If your device boot mode got changed, please change it again to NAND.**

This is a Video, which shows Step 2.

 

  • Step 3: Now you need to start up your Laptop / Computer and download the right file for your Device.

Download: https://mega.nz/folder/g9oHQDYA#t7H9GyX6wArzGNz1DZNTHA

 

  • Step 4: Now create a Folder according to your MAG-Model. E.g. mag250.
  • Step 5: Unzip the File into the folder and after the files are on the USB Drive you need to connect the USB Drive to your MAG Device.
  • Step 6: Now you need to disconnect your MAG device of the power supply and go into the Blue OS Setting screen by pressing the Menu-Button for 10 seconds while turning the device on.
    • For MAG devices over 300 and below 400, you need to go to “Upgrade Tools” and then on “Upgrade Software” → “Using USB”.
    • For MAG devices over 200 and below 300, you need to go to “Upgrade Tools” and after that on “USB Bootstrap

 

Here is a Video, which shows the exact Steps: